Raising/Repairing Sinking Concrete Slabs With PolyLevel
![](https://siamagazin.com/wp-content/uploads/2019/10/erern-min.jpg)
Soil erosion and settlement often cause concrete slabs in patios, sidewalks and driveways to sink into the ground. This type of settlement isn’t just unsightly; it can also cause more damage and can be a safety hazard. Water tends to pool on sunken surfaces and unleveled floors cause a trip hazard.
source/image: Supportworks
Until now, the only solution available to repair sinking slabs was mudjacking, a process that involves drilling large holes in the slab to inject a mixture of cement and mud underneath, to raise it back to level. Foundation Supportworks, an industry leader in the development of foundation repair technologies and solutions, proudly introduces the most advanced alternative to mudjacking – the PolyLevel System.
source/image: Supportworks
The PolyLevel System is a state-of-the-art approach to repairing sinking concrete slabs. It combines the concept of mudjacking with the most advanced technology. Instead of using a mix of mud and cement to raise the slab, PolyLevel utilizes high-density polyurethane specially engineered for this purpose.
Advertisement
The advantages of using PolyLevel over conventional mudjacking are many. PolyLevel is lighter than mud-cement mixes (4lbs per cubic foot opposed to 120lbs) so it will not overburden the loadbearing soil beneath the concrete and lead to further settlement. The expanding nature of the material allows it to penetrate crevices in the soil, completely filling the cavity and safely raising the slab to the desired level.
PolyLevel can be installed in just one day, through smaller, dime-sized holes drilled in the concrete and just 15 minutes after installation you can walk or drive over the slab!There is no need for extended periods of curing, as is the case with cement and mud compounds.
https://ift.tt/33vbHnF